LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - Bench Seat, Second Row >> Item 3: Pivot Handle Clip Disassembly Note

Item 3: Pivot Handle Clip Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Access the pivot handle clip from the bottom side of side shield, and remove the clip.
Fig 1: Removing Clip
G03246954Courtesy of FORD MOTOR CO.