Item 10: Seat Side Air Bag Connector Disassembly Note
WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and detach the seat side air bag connector and route through the seat cushion frame for backrest removal, noting the route for installation.
- Detach and disconnect the backrest TED electrical connector and disconnect the backrest climate controlled seat duct from the climate controlled blower for backrest removal.
NOTE: Disconnect and release any remaining electrical connectors and pin-type retainers attached to the seat cushion and pan assembly.
Disconnect the heated seat cushion element electrical connectors from the backrest heated seat element.