LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Seat System) >> Disassembly And Assembly >> Front Seat Backrest >> Item 1: Head Restraint Disassembly Note

Item 1: Head Restraint Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable tool, insert in the head restraint sleeve hole and release tab on head restraint sleeve and push the release tab on the other head restraint sleeve and remove the head restraint.
Fig 1: Inserting Head Restraint Sleeve Hole Using Suitable Tool
G03246966Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals