LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Seat System) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test L: DTC B2729 - Cushion Over-Temp Detected/DTC B2730 - Back Over-Temp Detected/DTC B2731 - Differential Temperature Fault - Passenger Seat >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

Each thermo-electric device (TED) contains an internal temperature sensor (thermistor) that is used by the climate controlled seat module (CCSM) to monitor the temperature of each (TED). Based on the temperature of a TED, the internal sensor resistance will vary the voltage on circuit 1548 (DG/LG) (seat cushion TED) and circuit 1549 (DB/OG) (backrest TED).