Seats - Heated
WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
This system allows the electrical heating of the front seats on demand.
The components of the system are:
- the seat heating elements are located in the seat cushion and seat backrest.
- the heated seat module is located on the seat cushion frame bottom.
- the heated seat control switches are located in the dual automatic temperature control (DATC) module.
- the temperature sensors are located in the cushion heating elements.
The heated seat system:
- will only operate with the ignition switch in RUN.
- will operate with battery voltage as low as 9 volts.
- will maintain a temperature automatically once it is selected.
- has a low and high setting.