LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Disc Brakes & Drum Brakes) >> Overhaul >> Master Cylinder >> Reassembly

Master Cylinder: Reassembly

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

To reassemble, reverse the disassembly/removal procedures. Before assembling the brake master cylinder, it is necessary to lubricate the brake master cylinder bore, pistons and new piston seals with High Performance DOT 3 Motor Vehicle Brake Fluid (C6AZ-19542-AB), or equivalent, meeting Ford specification ESA-M6C25-A, DOT 3.

scientia non olet · About LEMON Manuals