Speed Control DEACTIVATOR Switch
WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
Check and adjust brake pedal height as necessary. See BRAKE PEDAL HEIGHT . Measure distance from brake pedal stopper to threaded end of cruise control switch. Switch height "A" should be .012-.039" (0.30-1.00 mm). See Figure .
To adjust, loosen the speed control deactivator switch lock nut. Measure distance "A" between the brake pedal stopper and the threaded end of the speed control deactivator switch. Adjust the speed control deactivator switch to specification. Secure the speed control deactivator lock nut.