LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 531 (Information System & Warning System) >> Removal And Installation >> Horn

Removal And Installation: Horn

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. For additional information, refer to IDENTIFICATION CODES .
  2. NOTE: Tire removed for clarity.
    Fig 1: Horn Components Removal Sequence (Items 1-2)
    G03245827Courtesy of FORD MOTOR CO.
    Fig 2: Horn Components Removal Sequence (Items 3-5)
    G03245828Courtesy of FORD MOTOR CO.
  3. Remove the parts in the order indicated in the following illustration and table.
  4. To install, reverse the removal procedure.