LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Manual A/C-Heater Systems) >> Removal & Installation >> A/C Pressure Cut-Off Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Disconnect harness connector from A/C pressure cut-off switch. Unscrew pressure switch from compressor-to-condenser tube. To install, reverse removal procedure. Lubricate new "O" ring with clean refrigerant oil.