LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 526 (Automatic Transmission) >> In-Vehicle Repair >> Transmission Fluid Cooler >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Vehicles that are not equipped with a trailer tow package will have this type of a cooling system.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the parts in the order indicated in the following illustration.
    Fig 1: Transmission Fluid Cooler Removal Sequence
    G03244598Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals