Diagnostic Strategy: Diagnostics
WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out on-board diagnostic procedures Key On/Engine Off (KOEO) And Key On/Engine Running (KOER).
- Record all diagnostic trouble codes (DTCs).
- Repair all non-transaxle codes first.
- Repair all transaxle codes second.
- Erase all continuous codes and attempt to repeat them.
- Repair all continuous codes.
- If only pass codes are obtained, go to DIAGNOSIS BY SYMPTOM for additional information and diagnosis.
Follow the diagnostic sequence to diagnose and repair the concern the first time.