LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Intake Air, Fuel Charging, & Engine Electronics) >> Removal And Installation >> Fuel Injection Supply Manifold And Fuel Injector >> Item 8: O-Ring Seal Removal Note

Item 8: O-Ring Seal Removal Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use O-ring seals that are made of special fuel-resistant material. Use of ordinary O-rings can cause the fuel system to leak. Do not reuse the O-ring seals.
  1. Install new O-ring seals.
    Fig 1: Installing New O-Ring Seals
    G03244334Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals