LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Intake Air, Fuel Charging, & Engine Electronics) >> Removal And Installation >> Fuel Injection Supply Manifold And Fuel Injector >> Item 8: O-Ring Seal Installation Note

Item 8: O-Ring Seal Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the new O-ring seals with clean engine oil before installing.
scientia non olet · About LEMON Manuals