LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Intake Air, Fuel Charging, & Engine Electronics) >> Removal And Installation >> Cylinder Head Temperature (CHT) Sensor

Cylinder Head Temperature (CHT) Sensor

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY & CHARGING SYSTEM .
  2. Remove the parts in the order indicated in Fig 1.
    Fig 1: Cylinder Head Temperature (CHT) Sensor Parts Removal Sequence
    G03244355Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals