LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Engine Cooling System) >> Diagnosis And Testing >> Engine Cooling >> Component Tests >> Radiator Leak Test, Removed From The Vehicle

Radiator Leak Test, Removed From The Vehicle

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Never leak test an aluminum radiator in the same water that copper/brass radiators are tested in. Flux and caustic cleaners can be present in the cleaning tank and they will damage aluminum radiators.
NOTE: Always install plugs in the oil cooler fittings before leak testing or cleaning any radiator.
NOTE: Clean the radiator before leak testing to avoid contamination of the tank.
  1. Leak test the radiator in clean water with 138 kPa (20 psi) air pressure.