LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Engine) >> In-Vehicle Repair >> Rocker Arms, Valve Springs, Push Rods, Valve Tappets >> Item 8: Valve Spring Retainer Key Installation Note

Item 8: Valve Spring Retainer Key Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not release the compressed air from the cylinder until after the valve spring keys are installed.
    Fig 1: Installing Spark Plug
    G03243933Courtesy of FORD MOTOR CO.
  1. After installing the valve spring keys, release the air pressure from the cylinder. Install the spark plug.