LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Engine) >> In-Vehicle Repair >> Crankshaft Pulley and Crankshaft Seal >> Item 7: Crankshaft Front Seal Installation Note

Item 7: Crankshaft Front Seal Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the mating surface.
    2. NOTE: Lubricate the crankshaft front seal lips with clean engine oil prior to installation.
    Fig 1: Assembling Special Tools & Placing Crankshaft Front Seal Onto Special Tool
    G03243844Courtesy of FORD MOTOR CO.
  2. Assemble the special tools, then place the crankshaft front seal onto the special tools.
  3. Using the special tools, install the crankshaft front seal.
    Fig 2: Installing Crankshaft Front Seal
    G03243845Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals