LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Engine) >> In-Vehicle Repair >> Crankshaft Pulley and Crankshaft Seal >> Item 3: Subframe Bolt Installation Note

Item 3: Subframe Bolt Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the subframe into position, then install the bolts.
    Fig 1: Installing Subframe Bolts
    G03243847Courtesy of FORD MOTOR CO.
  2. Connect the RH front anti-lock brake wheel sensor electrical connector.
Fig 2: Connecting RH Front Anti-Lock Brake Wheel Sensor Electrical Connector
G03243848Courtesy of FORD MOTOR CO.