LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Anti-Lock Brake System) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Test >> Pinpoint Test N: DTC B2061, B2062, B2063, B2064, B2065, B2066, B2067, B2068, B2069, B2070, B2071, B2072, B2073 - Valve Solenoid Overtemp >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is turned to the ON position, the solenoids are set to the maximum ambient temperature stored in the ABS module from the last ignition switch cycle. The temperature of the solenoid is updated every 6 milliseconds. This temperature is an estimate based on the amount of time the solenoid is on or off. Temperature increases with the solenoid on and decreases with the solenoid off. Once the temperature reaches 220°C (428°F), a DTC is set.

scientia non olet · About LEMON Manuals