LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Anti-Lock Brake System) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Test >> Pinpoint Test B: DTC C1288 - Pressure Transducer Main/Primary Input Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

The brake pedal switch has 12 volts when the ignition is in the ON position. When the brake is applied, voltage to the ABS module is removed.

This normally closed switch is powered by the SJB on circuit 601 (LB/PK) and feeds the ABS module on circuit 535 (LB/RD).

scientia non olet · About LEMON Manuals