LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Suspension System) >> Removal And Installation >> Wheel Bearing, Wheel Hub, Wheel Knuckle, And Lower Arm - Front >> Item 11: Wheel Stud Removal Note

Item 11: Wheel Stud Removal Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable press, remove the wheel stud from the wheel hub and bearing assembly.
    Fig 1: Removing Wheel Stud From Wheel Hub And Bearing Assembly
    G03307543Courtesy of FORD MOTOR CO.