LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 517 (Noise, Vibration & Harshness) >> Description And Operation >> Noise, Vibration And Harshness (NVH) >> Glossary Of Terms >> Camber

Glossary Of Terms: Camber

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

The angle of the wheel in relation to the true vertical as measured looking from the front of the vehicle. Camber is positive when the wheel angle is offset so that the top of the wheel is positioned away from the vehicle.

Fig 1: Identifying Camber Positive And Negative Angle
G03243561Courtesy of FORD MOTOR CO.