LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Safety Belt System) >> Removal And Installation >> Retractor - Center Facing Rear Seat >> Notes

Retractor - Center Facing Rear Seat: Notes

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Tool(s)
G03277983Courtesy of FORD MOTOR CO.
  1. Remove the lower rear seat trim panel.
    1. Remove the pin-type retainers.
    2. Remove the lower rear seat trim panel.
      Fig 2: Removing Lower Rear Seat Trim Panel
      G03277984Courtesy of FORD MOTOR CO.
  2. Remove the center facing rear safety belt retractor.
    1. Use Safety Belt Bolt Bit to remove the bolt.
    2. Remove the center facing rear safety belt retractor.
      Fig 3: Removing Center Facing Rear Safety Belt Retractor
      G03277985Courtesy of FORD MOTOR CO.