LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Safety Belt System) >> Diagnosis And Testing >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Condition Possible Sources Action
  • The safety belt warning indicator lamp does not operate, the safety belt warning chime is OK
  • Burned-out bulb.
  • Circuitry.
  • Instrument cluster module.
  • Generic electronic module.
  • Neither the safety belt warning chime nor the safety belt warning indicator lamp operates
  • Safety belt switch.
  • Instrument cluster module.
  • Generic electronic module.
  • Circuitry.
  • Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract
  • Front safety belt retractor and tongue.
  • Rear safety belt retractor and tongue.
  • CARRY OUT the component appropriate Functional Test. INSTALL a new retractor if necessary.