Safety Belt System: Notes
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
The outboard safety belts for the front seats are a continuous-loop three-point system. The combination lap and shoulder belt (continuous-loop) uses a common sliding tongue and retractor.
The shoulder harness retractor is designed to let the webbing move freely in and out at all times, except during vehicle hard braking, hard cornering or an impact of 8 km/h (5 mph) or more, when it is automatically locked by a mechanically actuated inertia sensor.
There are front driver and outboard passenger safety belt and pretensioner buckle ends (16203) secured to the front seat assembly.