Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the screws and the tailgate access cover.

Fig 1: Installing Tailgate Access Cover
Courtesy of FORD MOTOR CO.
Disconnect the tailgate latch actuating rods from the remote control.
1. Open the clips.
2. Disconnect the tailgate latch actuating rods.
  
  Fig 2: Disconnecting Tailgate Latch Actuating Rods From Remote Control
  Courtesy of FORD MOTOR CO.
Remove the tailgate latch remote control nuts.

Fig 3: Removing Tailgate Latch Remote Control Nuts
Courtesy of FORD MOTOR CO.
Remove the tailgate release handle.
To install, reverse the removal procedure.