LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Windows And Glass) >> Removal And Installation >> Door Glass Top Run >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door glass. For additional information, refer to WINDOW GLASS - FRONT DOOR .
  2. Remove the front door beltline inside and outside weather-strips.
    Fig 1: Removing Front Door Beltline Weather-Strips
    G03277760Courtesy of FORD MOTOR CO.
  3. Remove the door glass top run bolt.
    Fig 2: Removing Door Glass Top Run Bolt
    G03277761Courtesy of FORD MOTOR CO.
  4. Remove the door glass top run.
    Fig 3: Removing Door Glass Top Run
    G03277762Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
Fig 4: Installing Door Glass Top Run Bolt
G03277763Courtesy of FORD MOTOR CO.