LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment (Front) >> Crown Victoria, Grand Marquis & Town Car

Crown Victoria, Grand Marquis & Town Car

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, 1999 Mercury Grand Marquis, and 1999 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.

Adjusting cams are provided for camber/caster adjustment. See Fig 1 . Loosen 2 nuts on top of adjusting cams. Turn hex cams to adjust camber/caster angle. Hold each cam and tighten nuts. Checking camber angle is not necessary after adjustment has been performed.

Fig 1: Adjusting Camber/Caster (Crown Victoria, Grand Marquis & Town Car)
G96G25490Courtesy of FORD MOTOR CO.