LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 478 (Clutch System) >> Removal And Installation >> Flywheel >> Removal

Removal And Installation: Flywheel: Removal

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the disc and pressure plate. For additional information, refer to DISC AND PRESSURE PLATE .
  2. Install the flywheel holding tool and remove the flywheel bolts. Remove the flywheel.
    Fig 1: Installing Flywheel Holding Tool
    G03276125Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals