LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Cable and Bracket >> Installation

Selector Lever Cable and Bracket: Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    • Move manual lever into the OVERDRIVE position.
    • Adjust the transmission shift cable. For additional information, REFER to CABLE/BRACKET ADJUSTMENT .
      Fig 1: Installing Transmission Shift Cable Bracket From Automatic Transmission
      G03276085Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals