LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Automatic Transmission) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Shift Concerns: No 5-4 Shift (Manual) - 271/371

Shift Concerns: No 5-4 Shift (Manual) - 271/371

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT CONCERNS: NO 5-4 SHIFT (MANUAL) - 271/371

Possible Component Reference/Action
271 - ELECTRICAL ROUTINE 
Powertrain Control System 
  • Electrical inputs/outputs, vehicle wiring harnesses, internal transmission wiring harnesses, PCM, TP, OSS and TCS
  • Carry out shift point test. Run on-board diagnostics. REFER to the INTRODUCTION - CNG, FLEX-FUEL & GASOLINE article. Carry out pinpoint tests using the diagnostic tool. Clear codes, road test and rerun on -board diagnostics.
371 - HYDRAULIC/MECHANICAL ROUTINE 
No hydraulic/mechanical components