LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Automatic Transmission) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Other Concerns: FMEM - Harsh Engagements and Shifts - 265/365

Other Concerns: FMEM - Harsh Engagements and Shifts - 265/365

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
OTHER CONCERNS: FMEM - HARSH ENGAGEMENTS AND SHIFTS - 265/365

Possible Component Reference/Action
265 - ELECTRICAL ROUTINE 
Powertrain Control System 
  • Operating in FMEM strategy. Electrical inputs/outputs, vehicle wiring harnesses, internal transmission wiring harnesses, PCM, EPC, OSS, Digital TR, TCC, TFT, TP and MAF, shift error detected (shift solenoid, TSS, OSS and internal hardware)
  • Run on-board diagnostic. REFER to the INTRODUCTION - CNG, FLEX-FUEL & GASOLINE article for diagnosis. Carry out pinpoint tests using the diagnostic tool. Repair as required. Clear DTCs, road test and rerun Self-Test.
365 - HYDRAULIC/MECHANICAL ROUTINE 
No Hydraulic/Mechanical Concerns