Torque Specifications
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Valve cover studs and bolts | 12 | 9 | - | ||
| Intake manifold bolts | (1) | (1) | - | ||
| EGR transducer bolts | 10 | - | 89 | ||
| Throttle body bolts | 25 | 18 | - | ||
| Engine bulkhead connector bolts | 9 | - | 80 | ||
| EGR valve bolts | 25 | 18 | - | ||
| Rocker arm bolts | 32 | 24 | - | ||
| Hose connection bolts | 25 | 18 | - | ||
| Crankshaft pulley bolts | 62 | 46 | - | ||
| Crankshaft position sensor bolts | 10 | - | 89 | ||
| Camshaft sprocket bolt | 62 | 46 | - | ||
| Exhaust manifolds nuts | (1) | - | - | ||
| Crossover pipe-to-exhaust manifold nuts | 40 | 30 | - | ||
| Oil level indicator tube bracket nut | 18 | 13 | - | ||
| EGR-to-exhaust manifold tube connector | 50 | 37 | - | ||
| Camshaft thrust plate bolts | 10 | - | 89 | ||
| Cylinder head bolts | (1) | - | - | ||
| Generator mounting bracket bolts | 51 | 38 | - | ||
| Oil pressure switch | 20 | 15 | - | ||
| Oil pan bolts | (1) | - | - | ||
| Engine mount bracket-to-insulator nuts | 109 | 80 | - | ||
| Oil pump-to-block bolts | 48 | 35 | - | ||
| Flywheel bolts | 80 | 59 | - | ||
| Main bearing caps bolts | 80 | 59 | - | ||
| Connecting rod cap nuts | 35 | 26 | - | ||
| Engine insulator-to-frame nuts | 112 | 83 | - | ||
| Valve tappet retainer bolts | 12 | 9 | - | ||
| Front cover bolts and studs | 25 | 18 | - | ||
| Crankshaft damper bolts | 145 | 107 | - | ||
| Serpentine belt tensioner bolts | 51 | 38 | - | ||
| Transmission-to-engine bolts | 45 | 33 | - | ||
| Transmission cooler line bracket bolt | 10 | - | 89 | ||
| Torque converter nuts | 35 | 26 | - | ||
| Powertrain control module ground strap nut | 10 | - | 89 | ||
| Powertrain control module connector bolt | 6 | - | 53 | ||
| Fuel injection manifold bolts | 10 | - | 89 | ||
| Fan shroud bolts | 7 | - | 62 | ||
| Transmission insulator nuts | 111 | 82 | - | ||
| Torque converter access plate bolts | 12 | 9 | - | ||
| Starter motor bolts | 25 | 18 | - | ||
| 48-pin wire harness connector bolt | 10 | - | 89 | ||
| Camshaft retainer plate bolts | 10 | - | 89 | ||
| Coolant pump pulley bolts | 25 | 18 | - | ||
| Accelerator cable bracket bolts | 10 | - | 89 | ||
| Fuel line bracket nut | 10 | - | 89 | ||
| A#C line bracket | 11 | 8 | - | ||
| Upper intake manifold support bracket stud bolts | 10 | - | 89 | ||
| Upper intake manifold support bracket nut | 6 | - | 53 | ||
| A/C bracket bolts | 46 | 34 | - | ||
| A/C bracket stud bolts | 48 | 35 | - | ||
| Fuel tube bracket-to-A/C bracket nut | 10 | - | 89 | ||
| Wiring harness bracket-to-A/C bracket nut | 10 | - | 89 | ||
|
|||||