General Specifications - Connecting Rod, Piston And Rings
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS - CONNECTING ROD, PISTON AND RINGS
| Item | Specification |
|---|---|
| Connecting Rod | |
| Piston Pin Bore Diameter | 23.105 - 23.145 mm (0.9096 - 0.9112 in.) |
| Crankshaft Bearing Bore Diameter Length (Center-to-Center) |
5.15 - 5.17 mm (2.250 - 2.251 in.) 140.46 - 140.54 mm (5.530 - 5.533 in.) |
| Alignment (Bore-to-Bore Max Diff.) | |
| Twist Bend |
0.075 per 25 mm (0.003 per in.) 0.04 per 25 mm (0.0016 per in.) |
| Side Clearance (Assembled to Crank) | |
| Standard Service Limit |
0.15 - 0.35 mm (0.006 - 0.014 in.) 0.36 mm Max.(0.014 in. Max.) |