General Specifications - Camshaft
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS - CAMSHAFT
| Item | Specification |
|---|---|
| Lobe Lift | |
| Intake Exhaust Allowable Lobe Lift Loss |
6.408 mm (0.260 in.) 6.604 mm (0.260 in.) 0.127 mm (0.005 in.) |
| Theoretical Valve Lift @ Zero Lash | |
| Intake Exhaust |
10.32 mm (0.419 in.) 10.65 mm (0.419 in.) |
| End Play | |
| Service Limit Journal to Bearing Clearance |
0.003 mm (0.007 in.) 0.025 - 0.076 mm (0.001 - 0.003 in.) |
| Journal Diameter | |
| All Cam Bearing I.D. |
50.987 - 51.013 mm (2.0074 - 2.0084 in.) 51.038 - 51.063 mm (2.0094 - 2.0104 in.) |
| Runout Limit Out-of-Round Limit |
0.05 mm (0.002 in.) Runout of No. 2 or No. 3 Relative to No. 1 and No. 4 0.025 mm (0.001 in.) |