LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (Engine - 3.0L (2V)) >> In-Vehicle Repair >> Flywheel >> Installation

In-Vehicle Repair: Flywheel: Installation

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flywheel.
    • Install the six bolts. Tighten the bolts in a criss-cross pattern.
      Fig 1: Installing Flywheel Bolts
      G03274128Courtesy of FORD MOTOR CO.
  2. Install the clutch. For additional information, refer to CLUTCH .
scientia non olet · About LEMON Manuals