LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (Engine - 3.0L (2V)) >> In-Vehicle Repair >> Crankshaft Front Oil Seal >> Removal

Crankshaft Front Oil Seal: Removal

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft vibration damper. For additional information, refer to CRANKSHAFT PULLEY .
  2. Remove the crankshaft front seal.
    Fig 1: Removing Crankshaft Front Seal
    G03274029Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals