Brake Shoes

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Inspect and measure the thickness of the brake shoe friction material.
- Install new brake shoes if the thickness of the friction material is less than the minimum specification. For additional information, refer to SPECIFICATIONS .
- Install new brake shoes if there are cracks in the lining through to the backing plate or if there are chunks missing. For additional information, refer to DISC & DRUM article.
- Verify that the mounting hardware is installed correctly and operating correctly.
- Verify that the backing plate contact points are free of corrosion that may cause binding.