General Specifications
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Lubricants and Sealants | |||
| Ford Black Silicone Rubber F4AZ-19562-B | WSE-M4G323-A123 | ||
| Motorcraft SAE 80W90 XL-80W90-QL Thermally Stable 4x4 Axle Lubricant | WSP-M2C12497-A | ||
| Lubricant Fill Level Checks | |||
| Front axle L (pint) | 126.54 (3.25) | ||
| Lubricant level mm (in) | 9.56 (0.38) below bottom of axle cover filler hole | ||
| Backlash Specifications | |||
| Ring gear backlash mm (inch) | 0.1283-0.20 (0.005-0.008) | ||
| Maximum backlash variation between points checked mm (inch) | 0.05 (0.002) | ||
| Rotational Torque Ranges | |||
| Pinion bearing preload (new pinion bearings) | 130.7-3.4 N.m (131325-30 lb-in) | ||
| Pinion bearing preload (original pinion bearings) | (1) | ||
| Clearance Specifications | |||
| Housing Spreader Adapter bolt thread engagement mm (inch) | 1352.7 (0.500) | ||
| Maximum spread of differential housing mm (inch) | 0.38136 (0.01375) | ||
|
|||