General Specifications
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Sealants | |
| SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL | WSP-M2C197-A |
| Additive Friction Modifier C8AZ-19B546-A | EST-M2C118-A |
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B |
| Clear Silicone Rubber D6AZ-19562-AA | ESB-M4G92-A |
| Threadlock and Sealer EOAZ-19554-AA | WSK-M2G351-A5 |
| Backlash Specifications | |
| Maximum back face ring gear runout | 0.102 mm (0.004 in) |
| Ring gear backlash | 0.203 - 0.304 mm (0.008-0.012 in) |
| Variation between teeth maximum backlash | 0.102 mm (0.004 in) |
| Rotational Torque Ranges | |
| Pinion bearing preload | 1.8-3.3 N.m (16-29 lb-in) |
| Driver handle | 2.2 N.m (20 lb-in) |
| Clearance Specifications | |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Differential side gear thrust washer thickness | 0.762 - 0.813 mm (0.030-0.032 in) |
| Differential pinion gear thrust washer thickness | 0.762 - 0.813 mm (0.030-0.032 in) |
| Maximum axle shaft end play | 0.762 mm (0.030 in) |
| Pinion flange runout | 0.25 mm (0.010 in) T.I.R. |
| RABS sensor air gap | 0.127 - 1.143 mm (0.005-0.045 in) |