LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 450 (Rear Drive Axle/Differential - Ford 7.5" Ring Gear) >> Diagnosis And Testing >> Rear Drive Axle and Differential >> Checking Tooth Contact Pattern and Condition of the Ring and Pinion >> High, Thin Contact Pattern In the Center Of the Tooth

High, Thin Contact Pattern In the Center Of the Tooth

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Gross Pattern Error 

Fig 1: Identifying High And Thin Contact Pattern - Center Of Tooth
G03272200Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals