LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Wheels & Tires) >> Removal And Installation >> Wheel and Tire >> Removal

Wheel and Tire: Removal

WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel cover (1130), if so equipped.
    2. CAUTION: Do not use heat to loosen a seized lug nut. Heat can damage the wheel and wheel bearings.
    NOTE: Do not remove the lug nuts (1012) at this time.
  2. With the weight of the vehicle still on the tires, loosen the lug nuts.
  3. Raise the vehicle until the wheel and tire assembly clears the floor. For additional information, refer to JACKING & LIFTING .
  4. Remove the lug nuts.
  5. Remove the wheel and tire assembly.
scientia non olet · About LEMON Manuals