LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (Seating) >> Diagnosis And Testing >> Seats >> Symptom Chart >> PINPOINT TEST V: DTC B2729 - Cushion Over-Temp Detected/DTC B2730 - Back Over-Temp Detected/DTC B2731 - Differential Temperature Fault - Driver Seat >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Each thermo-electric device (TED) contains an internal temperature sensor (thermistor) that is used by the climate controlled seat module (CCSM) to monitor the temperature of each (TED). Based on the temperature of a TED, the internal sensor resistance will vary the voltage on circuit 8-HC23 (WH/BK) (seat cushion TED) and circuit 8-HC16 (WH/RD) (backrest TED).