LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Cooling System Specifications & Drive Belt Routing) >> Cooling System Specifications >> Cooling System Specifications (F150 Pickup)

Cooling System Specifications (F150 Pickup)

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2002 Mercury Villager, 2002 Mercury Mountaineer, 2002 Lincoln Navigator, 2002 Lincoln Blackwood, and 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
COOLING SYSTEM SPECIFICATIONS (F150 PICKUP)

Application Specification
Coolant Capacity (1)
4.2L 17.3 Qts. (18.4L)
4.6L & 5.4L 19.4 Qts. (18.4L)
Supercharger Intercooler 4.2 Qts. (4.0L)
Cooling System Test Pressure (2)
Radiator 20 psi (1.4 kg/cm2 )
Intercooler 20 psi (1.4 kg/cm2 )
Pressure Relief Cap Opening Pressure (2)
Engine System 16 psi (1.1 kg/cm2 )
Supercharger Intercooler System 10 psi (.7 kg/cm2 )
Thermostat Opens
Starts 188-195°F (87-91°C)
Fully Open 208-215°F (98-102°C)
(1) Includes degas bottle fluid level between the COOLANT FILL LEVEL lines.
(2) Intercooler system is not connected to the main engine cooling system.