LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (Exterior Trim) >> Description And Operation >> Body System - Exterior >> Body and Sheet Metal >> Insulation

Body and Sheet Metal: Insulation

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Insulation is comprised of urethane, poly-vinyl chloride (PVC), and recycled felt. Insulation is installed under the roof panel, over the front and rear floor areas, above and below the instrument panel, in the B-pillar and C-pillar sections and on the cowl sides.