LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 426 (Automatic Transmission - 5R55S) >> Diagnosis And Testing >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the transmission external control.
  2. Visually inspect for obvious signs of mechanical and electrical damage. For additional information, refer to the following chart:
    MECHANICAL AND ELECTRICAL VISUAL INSPECTION

    Mechanical Electrical
    • Shift lock actuator
    • Transmission control switch (TCS)
    • SST (+/-) switches
    • Shift cable and bracket
    • Park sense switch
    • Central junction box (CJB) Fuse:
      • 204 (5A)
      • 205 (5A)
    • Damaged wiring harness
    • Loose or corroded connections
    • Powertrain control module (PCM)
  3. If the concern is not visually evident, determine the symptom. GO to SYMPTOM CHART .