LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Engine Cooling) >> Removal And Installation >> Thermostat and Thermostat Housing - 3.0L (4V) >> Material

Thermostat and Thermostat Housing - 3.0L (4V): Material

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION

Item Specification
Motorcraft Premium Engine Coolant VC-7-A (in Oregon VC-7-B) or equivalent (yellow color) WSS-M97B51-A1
  1. Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING  in this section.
  2. Remove the air cleaner outlet tube. For additional information, refer to INTAKE AIR, FUEL CHARGING, STARTING & ENGINE ELECTRONICS - 3.0L (4V) .
  3. Remove the components in the order listed in the following illustration and table.
  4. To install, reverse the removal procedure.
    Fig 1: Identifying Thermostat And Thermostat Housing - 3.0L (4V)
    G03201428Courtesy of FORD MOTOR CO.
  5. Fill and bleed the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING  in this section.