LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Engine Cooling) >> Removal And Installation >> Thermostat Housing - 3.9L >> Item 9: Thermostat-to-Thermostat Housing Retainer Removal Note

Item 9: Thermostat-to-Thermostat Housing Retainer Removal Note

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Thermostat can be rotated in either direction to release it from the thermostat housing.
    Fig 1: Pushing Down And Turn Thermostat Retainer To Release Thermostat From Housing
    G03201431Courtesy of FORD MOTOR CO.
  1. Using an 18-mm open-end wrench, simultaneously push down and turn the thermostat retainer to release the thermostat from the housing.