Description And Operation: Engine: Crankshaft
WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
The crankshaft is supported on the bottom of the cylinder block by 4 steel-backed, over-plated, aluminum crankshaft main bearings.
To provide smooth engine operation, the piston crankpins are positioned to provide a power impulse every 120 degrees of crankshaft rotation. The spacing provides smooth and quiet operation.
Two sprockets and timing chains connect the crankshaft with the camshafts and provide a 2:1 drive ratio.