LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Disc Brakes) >> Overhaul >> Front Brake Caliper >> Reassembly

Front Brake Caliper: Reassembly

WARNING: This page is about a different car, the 2004 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate caliper pistons, seals and bores with clean brake fluid.
  2. Install piston seals. See Figure .
  3. Install boots onto pistons. Insert pistons, and press into bores.
  4. Install NEW bleed screw and cap.